Kyocera S2300 manual Messaging

Unlock the Phone

1.From the home screen, select Unlock.

2.Enter your four-digit lock code.

Change Lock Code

Change your lock code from the default.

1.From Security, enter your four-digit lock code.

2.Select Change Lock Code > Yes.

3.Enter a new four-digit code.

4.Re-enter your new lock code.

Assign Special Numbers

Use Special Numbers (in case of emergency numbers) to specify three personal phone numbers you can call with your phone locked.

1.From Security, enter your four-digit lock code.

2.Select Special Numbers.

3.Select an Unassigned slot.

4.Enter the number and select Done.

You can view these numbers only when entering them for the first time.

To make a call to an ICE number from a locked phone, you must dial the number (including area code) exactly as stored in Special

Numbers.

Erase All Contacts

1.From Security, enter your four-digit lock code.

2.Select Erase Contacts > Yes > Yes to erase all entries from your contacts list.

Note: You cannot recover deleted information.

Erase All Downloads

1.From Security, enter your four-digit lock code.

2.Select Erase Downloads > Yes > Yes to erase all your downloaded (excluding the preloaded) content.

Note: You cannot recover deleted information.

Reset your Phone Settings

1.From Security, enter your four-digit lock code.

2.Select Reset Phone > Yes to reset your phone settings to the factory default, deleting all your custom settings.

Note: You cannot recover deleted information.

Messaging

Use Messaging to set up the settings affecting all messages. See “Message Settings” on page 42 for more information.

66 Messaging