Kyocera S2300 manual Getting Started, Phone Battery, Install the Battery, Charge the Battery

1 Getting Started

Phone Battery

Install the Battery

1.With the back of the phone facing you, press on the back cover and slide it to the bottom of the phone.

2.Lift the back cover from the bottom to remove.

3.Place the battery in the battery casing. The metal contacts of the battery must touch the metal contacts of the battery casing.

4.Align the back cover side tabs with the slots on each side of the phone.

5.Slide the back cover to the top of the phone until it is securely in place.

Charge the Battery

1. Open the microUSB jack cover on the top of the phone. Connect the AC adapter to the microUSB jack.

2.Plug the adapter into a wall outlet.

The battery icon in the upper-right corner of the screen tells you whether the phone is:

–Charging (the icon is animated)

–Partially charged

–Fully charged

You must have at least a partial charge in the battery to make or receive calls. You can safely recharge the battery at any time, even if it has a partial charge.

Note: Before removing the battery, make sure the phone is powered off.

User Guide 9