Kyocera K612 manual Setting sounds for your phone, Adjusting volume

82-N8757-1EN.book Page 52 Wednesday, April 26, 2006 10:47 AM

2.Scroll down the list to hear the different rings

and press to select one.

Note: Downloaded ringtones are added to the end of the standard list of ringtones.

Changing your personal ringtone

Your Switch_Back phone has multiple ringtones you can choose to use for incoming calls from your Personal group.

1.Select Menu → Settings → Sounds → Personal ringers.

2.Scroll down the list to hear the different rings

and press to select one.

Note: Downloaded ringtones are added to the end of the standard list of ringtones.

Setting sounds for your phone

You can set your phone to sound tones when you open and close the flip and when you turn the phone on and off. Sounds will not occur during an incoming call, if you are in a call, or if a headset or car kit is attached to your phone.

Set sound when flip opens

1.Select Menu → Settings → Sounds → Flip open.

2.Scroll through the list to hear the sounds and

press to select one.

Set sound when flip closes

1.Select Menu → Settings → Sounds → Flip closed.

2.Scroll through the list to hear the sounds and

press to select one.

Set sound when phone powers on or off

•Select Menu → Settings → Sounds → Pwr on/off sound → Enabled.

– To deselect this sound, select Disabled.

Adjusting volume

You can adjust the earpiece, speakerphone, and ringtone volume as well as key tones.

Adjusting the ringtone volume

1.Select Menu → Settings → Sounds → Ringtone volume.

2.Press right to increase the volume, or left to decrease the volume.

3.Press the left softkey to select Save.

Adjusting key tone volume

You can change the volume of the tones the phone makes when you press the keys.

1.Select Menu → Settings → Sounds → Key volume.

2.Press right to increase the volume, or left to decrease the volume.

52 Customizing Your Phone