Kyocera K612 Finding your phones serial number, Installing the battery, Charging the battery

82-N8757-1EN.book Page 1 Wednesday, April 26, 2006 10:47 AM

1GETTING STARTED

Finding your phone's serial number

To activate your Virgin Mobile account, you need your phone's serial number. To locate the number:

1.Turn your phone off.

2.Hold your phone face up in your left hand.

3.Insert your right thumbnail into the groove on the right side of the phone and push down to pop the back cover off.

4.Remove the battery by pulling back on the top edge of the battery.

5.Your phone's serial number (the ESN) is located just below the first barcode inside the phone, next to the letter "D." It is an 11-digit number.

6.Write down the ESN.

Installing the battery

Your Switch_Back phone comes with a removable lithium ion (LI Ion) battery. Fully charge the

battery before using the phone.

To install the battery:

1.Remove the back cover by holding the phone face up in your left hand.

2.Insert your right

thumbnail into the groove on the right side of the phone and push down to pop the back cover off.

3.Place the battery in the

phone casing the metal contacts of the battery touching the metal contacts of the phone.

4.Replace the back cover

by sliding the notches into the opening on the left side of the phone.

5.Snap the back cover into place

Charging the battery

You must have at least a partial charge in the battery to make or receive calls.

To charge the battery:

1.Connect the AC adapter to the jack on the bottom of the phone. Do not force

the AC adapter into the jack. Make sure the arrow is face up

as shown.

2.Plug the adapter into a wall outlet.

User Guide for Switch_Back 1