Kyocera Wild Card manual Basic functions, Powering up, Making phone calls, Answering phone calls

2 Basic functions

This section explains the basic functionality of your phone. For more detailed explanation of your phone’s features please refer to the later chapters.

Powering up

To turn your phone on, press and hold the End key and wait until the phone display lights up.

To turn your phone off, press and hold the End key until the phone turns off.

Making phone calls

Make sure you are in an area where a signal can be received. Look for the signal strength icon on the main screen. The more bars you see in this symbol, the stronger the signal. If there are no bars, move to where the signal strength is better.

When the phone has been idle for a while with no signal, it changes to power save mode. When you see “Power Save” on your phone’s screen, press any key to return to normal operating mode. You can make a phone call in one of the

following ways.

Call using a number

At the main screen:

1.Enter a phone number.

2.Press the Send key.

Call using a contact

At the main screen:

1.Select Contacts to open your contacts list.

2.Highlight a contact and press the Send key.

Call using voice commands

You can use voice commands to call a contact from your voice dial list or to dial a phone number. For more information, see “Voice recognition” on page 63.

Redial a number

At the main screen:

1.Press the Send key twice to open your call history.

2.Highlight a phone number or contact and press the Send key.

Tip: To redial the last number called, received or missed, press the Send key three times.

Answering phone calls

When a call comes in, the phone rings, vibrates, or lights up. The phone number of the caller also appears if it is not restricted. If the number is stored in your contacts list, the contact

name appears.

You can answer a phone call in one of the following ways.

12 Powering up