Kyocera Wild Card manual Getting started, Phone battery

1 Getting started

Phone battery

Installing the battery

To install the battery:

1. Hold the phone face down and locate the screw on the back cover.

2.Turn the screw to set the screw slot in vertical

position to unlock the back cover.

3. Locate the groove on the left side of the phone and unsnap the hooks to remove the back cover.

4. Place the battery in the phone casing with the metal contacts of the battery touching those of the phone.

5.Replace the back cover by

sliding the notches into the opening on the left side.

6.Snap the back panel

into place. 7. Set the screw slot in horizontal position to lock

the back cover.

Note: To remove the battery,

make sure the phone is powered off.

Charging the battery

You must have at least a partial charge in the battery to make or receive calls.

To charge the battery: Connect the AC adapter to the

jack on the bottom of the phone. Do not force the AC adapter into the jack. Plug the

adapter into a wall outlet.

The battery icon in the upper-right corner of the screen tells you whether the phone is:

•Charging (animated icon)

•Partially charged

•Fully charged

Warning: The battery does not charge if you use the phone while it is connected to an AC adapter.

Recharging the battery

You can safely recharge the battery at any time, even if it has a partial charge.

Caring for the battery

General safety guidelines

•Do not disassemble or open the battery.

•Do not crush, bend, deform, puncture, or shred the battery.

•Do not attempt to insert foreign objects into the battery.

User Guide 1