Phone Battery
Install the Battery
To install the battery:
1.Hold the phone face down.
2.Find the notch directly below the back cover. It is square. Using your thumbnail, pry the cover up from the bottom to remove.
3.Place the battery in the battery casing with the
metal contacts facing toward the top of the phone. The metal contacts of the battery must make contact with the metal contacts of the battery casing.
4.Replace the battery cover by sliding the notches into the
openings on the top of the battery casing.
5.Snap the cover into place.
Charge the Battery
You must have at least a partial charge in the battery to make or receive calls.
To charge the battery:
1.Connect the AC adapter
to the microUSB jack on the side of the phone.
2.Plug the adapter into a
wall outlet. The battery icon in the
–Charging (the icon is animated)
–Partially charged
–Fully charged
You can safely recharge the battery at any time, even if it has a partial charge.
Note: Before removing the battery, make sure the phone is powered off.
Battery Safety Guidelines
•Do not disassemble or open the battery.
•Do not crush, bend, deform, puncture, or shred the battery.
•Do not attempt to insert foreign objects into the battery.
2 | Phone Battery |