Set Digit Lengths
You can set the number of digits used for a phone number in your voice dial list.
From Digit lengths, select one of the following options:
•North american recognizes only 7, 10, and 1 + 10 digits in a phone number.
•Permit all allows
Enable Voice Answer
You can set your phone to answer a call with your voice when using a
1.From Auto answer, select Disabled.
2.From Ringer mode, select Normal sounds.
3.From Headset sound, select Out of headset.
4.From Voice answer, select With accessory.
Enable Voice Wake-up
•From Headset sound, select Out of headset.
•From Voice
Note: You must use a headset or
Use Voice Training
If your phone has trouble recognizing your voice, you can train your phone to recognize specifically your voice for numbers.
1.From Voice training, read the message and select OK > Train numbers > OK.
2.Follow the prompts for each number until training is complete.
Note: You must read the numbers digit by digit for voice training to work.
Enable Auto-Answer
From Auto answer, select After 5 seconds. The phone automatically answers after five seconds with a headset attached.
Enable Any Key
From Any key, select one of the following:
•Any key mute to silence calls when you press any key except for the Send or Speakerphone key.
•Any key answer to answer calls when you press any key except for the End, Back, or Navigation key.
Security
This section describes the security features on your phone. You can adjust these features to prevent access to your personal information. All security features are shielded by a
User Guide | 23 |