Keyguard
Enable Keyguard
Use Keyguard to lock the keypad immediately or to automatically lock the keypad after a period of inactivity to prevent accidental key presses.
From Keyguard, select one of the following:
•to immediately lock the keypad.
•to lock the keypad after 30 seconds of inactivity.
•to lock the keypad after 1 minute of inactivity.
•to lock the keypad after 5 minutes of inactivity.
Note: You can also activate Keyguard by pressing and holding the * Shift key.
Note: In a voice call or an active data call, user cannot change the keyguard menu setting. User will be prompted with "Feature can not be used during a call". Only in dormant data session or idle mode can the user make any changes to the keyguard setting.
Unlock Keyguard
From the home screen, select Unlock and press the * Shift key to unlock the keypad.
Call Contact using Fast Find
1.From Fast find, select Enabled to turn on fast find.
2.From the home screen, press the keys corresponding to the letters of the name you want to find. A matching contact or speed dial entry appears.
3.Scroll to your desired contact and press the Send key to call the number.
Enable Frequent List
From Frequent list, select Enabled. With Frequent list enabled, the last 15 of your most frequently called contacts appear at the beginning of your contacts list. Scroll past the double line to view the entire contacts list.
Answer Hold
Enable Answer Hold
Use Answer Hold to place incoming calls on hold until you are ready to answer them.
1.From Answer Hold, select Enabled.
If you have not recorded a hold message, you need to record one, such as “Please hold. I’ll answer in a minute.”
2.Record the message twice, as prompted.
3.Select Save or Options and one of the following:
–Play to replay your message.
–
–Exit to exit.
The next time a call comes in, you can place it on hold.
User Guide | 21 |