Entering letters, numbers, and symbols
Using 
rapid text entry
®
Tegic T9® Text Input rapid text entry mode allows you to enter text quickly. For
example, to enter the word “how,” press keys 
→ 
→ 
in this order. The software suggests words as you type.
■Wait until you have typed the entire word before checking the screen to see if the word shown is correct.
■Press 
to see alternate word choices.
■Once you see the correct word, press 
right or 
to move the cursor and continue entering text.
■For more instructions on how to use Tegic T9 rapid text entry, go to www.tegic.com.
T9 Text Input is only available for the English language on this phone.
Note
Tip
Rapid text entry example
®
The following steps describe how to enter the name “Jane”:
Wait until you have typed the entire word before checking the screen to see if the word shown is correct. In the example below, the word “Jane” will not appear immediately; look at the keypad, not the phone screen, as you enter letters.
1.When you are in the text entry screen, select T9 rapid text entry mode. (See “Changing text entry modes” on page 21).
2. Make sure | appears next to | at the bottom of the screen. If it does not |
appear, press | three times. | ® |
|
3.Press 
once. The letter “k” appears.
4.Press 
once. The first letter changes to a “l” and the letter “a” appears next to it.
5.Press 
once. The first letter changes to a “j”, the second letter remains an “a,” and the letter “n” appears next to it.
6.Press 
twice. The letter “e” appears.
Entering 
symbols
1.From the text entry screen, press 
to highlight the options at the bottom of the screen.
2.Press 
right to the text entry mode you are currently using.
3.Press 
in to select the mode.
4.Press 
down to scroll through the list of modes.
5.Highlight 
Symbols, then press 
to select it.
22 | Reference Guide for the QCP 3035 Phone |