Digital or analog mode
1.Select Menu → Settings → Network → Digital or Analog.
2. Press in to select an option:
•Automatic—Automatically switches the phone between digital and analog.
•Analog only—Sets the phone to work in analog mode only.
•Analog call—Forces a call into analog mode for the duration of the next call.
•Digital only—Sets the phone to work in digital mode only.
Roam Option
This setting determines which signals your phone will accept.
1.Select Menu → Settings → Network → Roam Option.
2. Press in to select an option:
•Automatic (recommended setting)—Accepts any system the phone service provides.
•No Roaming—Prevents you from making or receiving calls outside of your home service area.
Roam/Service Alert
Use this setting to have the phone alert you when you roam outside of your home service area.
1.Select Menu → Settings → Network → Roam/Srvc Alert.
2. Press in to select an option:
•Disabled—You are not alerted if you roam outside your home service area.
•When no service—Alerts you when service is lost. When service is re-acquired, you will be alerted again.
•On roam change—Alerts you when roaming service is acquired. When home area service is acquired again, you will be alerted again.
•On any change—Alerts you if there is a change in roaming service or if the phone loses service.
Privacy Alert
1.Select Menu → Settings → Network → Privacy Alert.
2. Press in to select an option:
•Enabled—Plays an audible alert whenever enhanced privacy is lost or regained and a call is in progress.
•Disabled—No alerts are used.
An alert message always shows on the screen, regardless of these settings.
Note