Extras
Voice Training
During Voice Training, you speak a series of commands and the VR “learns” your voice.
Perform Voice Training in a quiet environment, and speak naturally into the microphone.
If the voice commands you repeat during training do not match, VR will ask you to repeat the command. Do not speak a command until the prompt is complete. If you speak too soon, you will hear three tones.
1.Select Menu→Settings→Extras →Voice Training.
2.Select the training option you wish to use, and press in to select it.
3.The VR asks you to say a command.
4.Say the command you hear clearly into the microphone and listen for “Again.” Say the command again until you hear “Training completed.”
5.Press when finished to return to the home screen.
To end Voice Training at any time, press or . The VR recognizes the “Yes” and “No” commands without training. If you are having difficulty using these commands, training the VR will improve performance. If you do not train the VR feature, the “Yes” and “No” commands can be activated by anyone.
You may train the “Wake Up” command, but this feature may only be used with an accessory, such as a headset,
To activate VR
Once VR training is complete, you can activate the system in one of two ways:
■From the home screen, press .
■If you are using your phone with a headset,
To make a call
1.From the home screen, press .
2.The VR responds “Say a name”.
3.Say the name of the person you wish to call.
4.The VR responds “Calling [Name]”. Remain silent to make the call, or say “No” to cancel the call.
If there are multiple matches to the name that you requested, the VR will ask you to verify which name you want to call. Reply “Yes” or “No” until you hear the desired name.
34 | Reference Guide for the QCP 3035 Phone |