BEFORE USING | BATTERY USAGE |
■BATTERY INSTALLATION
As shown in the picture below, put the metal locators of the battery into the holes located in the bottom of the unit.
Place the battery on the back of the handset and slide into place.
Push the battery down until it locks into place.
■BATTERY REMOVAL
Pull up the release latch, lift up the battery.
Remove the battery from the handset.
If the battery is not correctly placed in the compartment, the handset will not turn on and/or the battery may be detached during use.
BATTERY USAGE | BEFORE USING |
■BATTERY CHARGING
POWER CONNECTION
Plug the AC Charger into a standard outlet.
Plug the other end of the AC Charger into the bottom of your phone. The battery must be installed onto the phone.
•You cannot operate the phone until it is powered on.
•Fully charge the battery before use.
•It is more efficient to charge the battery with the handset powered off.
•The battery must be connected to the phone in order to charge it.
•Battery operating time gradually decreases over time.
•If the battery fails to perform normally, you may need to replace the battery.
14 | 15 |