Ecom Instruments Ex-GSM 01 EU operating instructions

7.7.6 Connections

You can connect the telephone to compatible devices via infrared. You can also arrange the settings for GPRS dial-in connections.

Infrared

The telephone can be configured for sending and receiving data via its infrared connection (IR). To use an IR connection, the other device must be IrDA-compatible. You can send data to a compatible telephone or data device (such as a computer) via the IR connection of your telephone or you can receive data from them.

Note: Do not aim the IR beam (infrared beam) toward the eyes of other persons and avoid allowing your IR beam to disturb other IR devices. The unit is a Class 1 laser product.

When sending and receiving data, make sure that the IR connections of the sending and receiving units point toward each other and that there are no obstacles between the units.

To activate the IR connection of your telephone for receiving data, select Menu > Settings > Connections > Infrared.

To deactivate the IR connection, select Menu > Settings > Connections > Infrared. When the telephone displays the message Deactivate infrared? Select Yes.

If data transmission is not started within two minutes after activating the IR connection, the connection has been broken and must be re-established.

Package data (EGPRS)

EGPRS (General Packet Radio Service – Package data) is a network service, which mobile telephones can use to send and receive data via IP networks. EGPRS allows for wireless access to data networks such as the Internet.

Applications that can use the package data are MMS, Browser sessions, e-mail, remote SyncML, downloading Java applications and PC dial-in.

To determine how you would like to use this service, select Menu > Set- tings > Connections > Package data > Package data connection.

61