Ecom Instruments Ex-GSM 01 EU operating instructions

Page 9

Close the cover of the SIM card holder (8). Push the cover of the SIM card holder toward the upper end of the telephone until it engages (9). Align the contacts of the battery to the gold contacts and insert it into the tele- phone. With the contacts entering first, push the battery into the battery compartment (10). Close the battery cover (11). Place the telephone in the lower cover, and push the cover forward while doing so, until it engages (12).

7.1.2 Charging the battery

Warning: Use only the batteries, chargers and accessories approved for use with this model by ecom instruments GmbH. Using other types may result in the forfeiture of the certification or valid warranty or guarantee and could be hazardous.

Check the model number of the charger before using it in conjunction with your telephone. This unit can be used with charger types LGH G01 or Carkit CK G01. Please ensure that the unit is only charged outside of the Ex-area!

When disconnecting the cable from the accessories, be sure to pull on the plug and not the cable.

1.Open the lower flap of the mobile telephone.

2.Connect the charger to a power socket.

3.Plug the charger connection into the telephone at the bottom end.

If the battery is completely discharged, it may take a few minutes before the LED can be seen and/or before calls can be made. The charging time depends on the specific charger and battery being used.

50

Image 9
Contents Ex-GSM 01 EU Page Page Page Page Ex-data Type examination certificate no Please Note Page Page Page Page Answering or refusing a call Text input Page Page Page Search by name Settings 7.7.1 Profiles Page Page Page Page Page Page Page Page Page Page Page Page Page Synchronization Computer connection Page Page Maintenance Page Page Type Examination Certificate Page Page Measuring & Calibration