Power supply
553AB_1999Q
The power supply is selected by the service provider and the installer based on the availability of power at your location. The power supply provides +12 volts to the junction box and RAU.
QGFSP Installation
QUALCOMM sells a power supply for use with the QGFSP. If you do not have a reliable source of AC power, your service provider may have elected to provide power by another means such as a solar panel system or a gas generator. QUALCOMM does not sell these alternative power systems. Please contact your service provider for details regarding them.
Note
Your installer will have equipped your installation with a power supply.
The installation is described in detail in the QUALCOMM Globalstar
What you need to do
If your service provider did not supply a telephone, you will need to purchase a commercially available
Select a telephone
If you are selecting your own telephone, look for one that uses standard DTMF tones (industry standard tones), not pulses, for dialing.
You must select a telephone that uses Tip and Ring. Your service provider may be able to direct you to a supplier.
For optimal results, a telephone should have good voice quality. Sound quality is determined by the telephone itself, as well as by signal reception. Your service provider representative can ensure proper placement of components to obtain the best signal reception.
Note
You may need to try several telephones before you find one that offers good voice quality when used with the QGFSP.
5