Problem | Solution | |
Busy/Reorder tone | 4. | The antenna or other |
(cont.) |
| QGFSP components may be |
|
| broken or damaged. |
|
| Weather conditions may be |
|
| making phone transmission |
|
| difficult. Contact your |
|
| service provider. |
| 5. | Your unit may have power, |
|
| but not be able to connect |
|
| with the Globalstar system. |
|
| Contact your service |
|
| provider. |
Phone number | 1. | Check the telephone |
dialed, but did not |
| number. You may have |
go through |
| misdialed or dialed incorrect |
|
| numbers. |
| 2. | The telephone you are |
|
| dialing may be busy. |
Phone does not ring | 1. | You may have connected too |
|
| many telephones. |
| 2. | Check the ringer volume |
|
| switch (if your phone has |
|
| one) and set it to ring louder. |
| 3. | Verify that the telephone is |
|
| set to tone, not pulse. |
| 4. | Be sure your telephone is |
|
| plugged into the jack |
|
| correctly. |
Sound volume is too | Another telephone in your | |
low | building may be off the hook. | |
| Hang up the extension. | |
Poor reception | Check the telephone wiring | |
| inside your building. Worn or | |
| poor quality telephone wiring | |
| may need to be replaced. | |
Dial tone in middle | The call has been lost. Hang up, | |
of call | then dial again and attempt to | |
| reestablish the call. | |
12