Placing a Telephone Call
1.From the home screen on the FLX Dialer enter the phone number to be called.
2.Once the number is entered completely, press the green ‘call’ button to initiate the phone call.
3.If any Microphones are out of the Charger Base and active, the call will default to ‘speaker mode’ and will be identified by the ring tone being played out of the Speaker.
4.If no Microphones are available then the call will default to ‘handset mode’ and the call will take place on the FLX Dialer.
Answering an Incoming Telephone Call
1.When the FLX2 System identifies an incoming call, it will play the ring tone through the FLX Speaker. If the Dialer is not in the Charger Base it will also play a ring tone.
2.If your phone line supports caller ID, and the caller has not suppressed their caller ID information, the FLX Dialer will display the caller ID information for the incoming call.
3.A call can be answered in one of three fashions.
a.Press the Green ‘Call’ button or the ‘Answer’ key on the FLX Dialer.
b.Remove a Microphone from the charger.
c.Press the mute/unmute button on a Microphone that is already out of the charger.
Note: If there is either no Speaker or no Microphones active and available when the incoming call is answered from the FLX Dialer, the call will default to ‘handset mode’ and will remain in ‘handset mode’. The call can only be switched to ‘speaker mode’ on the FLX Dialer if at least one Microphone is out of the Charger Base and switched on and the Speaker is switched on.
17