Vidikron 80 manual Replacing the Lamp For service personnel only, Lamp and Lamp Usage Time

Page 29

Replacing the Lamp (For service personnel only)

Lamp and Lamp Usage Time

The maximum life of the lamp used for this unit is about 2000 hours, and may be far less depending on the type of usage and projector settings.

• The lamp life may not reach 2000 hours depending on the operating conditions.

When the lamp approaches the end of its service life, deterioration progresses rapidly. Get ready or replace with a new lamp when the ac- cumulated lamp usage time exceeds 1900 hours. Depending on the operating conditions, the lamp may have to be exchanged earlier. If the image is dark or color tone abnormal, replace the lamp as soon as possible. You can also check the accumulated hours of usage. Please refer to the “Lamp Hour” item of the “Information” menu. (Page 23,)

Please consult your authorized Vidikron dealer when purchasing a new lamp unit

■When the lamp usage time exceeds 1000 hours

A message indicating “1000 h” will be displayed on the screen.

•Press the [EXIT] button to clear the display.

■When the lamp usage time exceeds 1900 hours The [LAMP] indicator lights up.

■When starting projection after lamp usage time exceeds 1900 hours

The “Lamp replacement” message will be displayed on the screen.

•Press the [EXIT] button to clear the display.

■When lamp usage time exceeds 2000 hours The [LAMP] indicator starts to blink.

The“Warning”and“Lamp replacement”messages will be displayed

on the projected screen with the “Warning” word blinking.

• Press the [EXIT] button to clear the display.

However, the same “Warning” and “Lamp replacement” messages will be displayed again after 1 hour.

When the unit is switched to the standby mode or turned off after the lamp usage time exceeds 2000 hours, it cannot be switched back to the projection mode again. In this case, replace with a new lamp and reset the lamp time.

■When the lamp usage time exceeds 2010 hours

The unit quits the projection mode (operating mode) and switch- es into the cool down mode.

•The [LAMP] and [OPERATE] indicators will start blinking.

•The projection mode (operating mode) cannot be restored until a new lamp is replaced and the lamp time reset.

About Lamp Replacement

•If this unit is installed in a constricted place, attempting to replace the lamp in that place may cause injury. Move this unit to a place large enough to perform the work.

•Use only genuine replacement parts for the lamp unit. Otherwise, malfunction may occur. Also, never attempt to re-use an old lamp unit. This may cause marked performance deterioration or lamp blowout, thus leading to unit malfunction. Broken pieces of the lamp outside this unit may also cause injuries during lamp unit exchange.

•Do not replace the lamp immediately after this unit has been used. The temperature of the lamp unit is still high and this may cause a burn. Allow a cooling period of 1 hour or more before replacement.

•Before replacing the lamp unit, pull out the power plug from the outlet while the [STAND BY] indicator is still on. Replacing a lamp with the plug connected to the outlet may cause injuries or electric shocks.

Resetting Lamp Time

After your Vidikron dealer installs a new lamp, he will reset the lamp time. The lamp time counter will be reset and a new count will start. If display of the accumulated lamp time has reached 2000 hours, this unit will not work (lamp does not light up) unless the lamp time is reset.

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents ILA Projector Table of Contents Contents of the package Features You’ll enjoy includeIntroduction OptionsAbout the installation place Safety PrecautionsFCC Information U.S.A. only Machine Noise Information Germany onlyDo not allow any unqualified person to install the unit This Apparatus Must be GROUNDED. Important Safety Precautions Power ConnectionEnvironment of Use Maintenance ProceduresAbout Burning-in of D-ILA Device For Projectors, Video Processors and Controllers WarrantyEffective Warranty Date Projector Chassis Cover Controls and FeaturesTo Open the Projector Cover To Close the Projector CoverService Terminal Connector PanelSync OUT Terminal RS-232C Terminal D-sub 9 PinLamp Indicator Controls and Features Control Panel on the ProjectorAbout Cool Down Mode Indicator Display on the Control PanelControls and Features Remote Control Precautions for Installation Installing the ProjectorInstallation Environment Precaution for UsageMounting the Unit on a Ceiling Installing the Projector Projector and Screen InstallationPrecautions for Ceiling-mount Screen Size and Projection Distance Throw Distance ChartWhen directing remote control unit toward this unit When reflecting off a screenConnecting to Devices Connecting to Various DevicesConnecting to the VDP-80 digital video processor Control from an external automation devicePage Adjusting Zoom Turning on the powerAdjusting Focus Basic OperationPress Mute Pull out the power plug from the power outletBasic Operation Hiding the image temporarily Menu Structure Adjustments and Settings Using MenusFunction Adjustments and Settings Using Menus Menu Operation ButtonsAfter setting is completed, press Exit Procedures for Menu OperationPress the Menu button Press 5/6 to select a main menu item and Enter to confirmAdjustments and Settings Using Menus Project image onto the screen Screen BlankingPress 5/6 to select Projector Opt, followed by pressing Press the Menu button to endPress 5/6 to selectOptions, followed by pressing Enter Shift SettingResetting Lamp Time Replacing the Lamp For service personnel onlyWhen the lamp usage time exceeds 2010 hours Lamp and Lamp Usage TimeCleaning and Replacing the Filter Message What to do when these messages are displayedPlease follow the procedures below About warning indicatorsActions to be taken upon warning indications For NosSymptom TroubleshootingRS-232C Terminal DVI Terminal Terminal DescriptionPin Arrangement Communication Specifications Command FormatRS-232C External Control Terminal Description External control command tableParameters used for the data format Numeric valueSpecifications Dimensions Page RUMA-011080 Version
Related manuals
Manual 40 pages 31.71 Kb

80 specifications

The Vidikron 80 is a cutting-edge display technology that has redefined home entertainment with its exceptional visual performance and advanced features. Designed for the modern cinema enthusiast, the Vidikron 80 is known for its stunning image quality, sleek design, and user-friendly interface, making it an attractive addition to any home theater setup.

One of the standout features of the Vidikron 80 is its high-resolution panel, which supports 4K Ultra HD content. This resolution delivers four times the detail of standard Full HD, ensuring that viewers experience images with incredible clarity and lifelike colors. The display utilizes advanced color processing technology, allowing for a wider color gamut and improved color accuracy. This makes it ideal for everything from watching movies to playing video games, as colors pop off the screen with vibrant intensity.

Another significant technological advancement incorporated into the Vidikron 80 is its dynamic contrast ratio. This feature enhances the depth of black levels while providing bright highlights, resulting in a more immersive viewing experience. The display employs local dimming technology, which means that specific zones of the backlight can be adjusted to improve contrast without sacrificing brightness. This is particularly effective for dark scenes in films, where detail is crucial.

The Vidikron 80 also boasts an impressive refresh rate, allowing for smoother motion during fast-paced scenes. This is particularly beneficial for sports and action films, where frame tearing and motion blur can detract from the viewing experience. With a refresh rate of 120Hz or higher, users can enjoy fluid motion without interruptions.

In terms of connectivity, the Vidikron 80 comes equipped with multiple HDMI ports, ensuring compatibility with a plethora of devices, including gaming consoles, Blu-ray players, and streaming devices. Additionally, the display supports various audio formats and integrates seamlessly with home audio systems, enhancing the overall cinematic experience.

The user interface of the Vidikron 80 is designed with simplicity in mind. It features an intuitive remote control and smart features that allow users to navigate their favorite content easily. With built-in streaming capabilities, viewers can access popular services such as Netflix, Amazon Prime Video, and more, all from a single device.

Overall, the Vidikron 80 exemplifies the perfect blend of cutting-edge technology and user-friendly design, making it a top choice for anyone looking to elevate their home entertainment experience to new heights. Whether for movie nights, gaming, or streaming, the Vidikron 80 delivers unparalleled performance that will leave a lasting impression.
Top Page Image Contents