Vidikron 80 manual Cleaning and Replacing the Filter

Page 30

Cleaning and Replacing the Filter

Have your Vidikron dealer clean the ﬁlter regularly or air intake eﬃciency may deteriorate and malfunction may occur. If the ﬁlter is ex- tremely dirty and cannot be cleaned, or if it is damaged, replace the ﬁlter with a new one. Otherwise, dirt may enter the unit and appear on the screen, preventing you from enjoying the video fully. If dirt has entered the unit or if you need information about the ﬁlter, please consult your authorized Vidikron dealer.

• The air inlet ﬁlter on the right side cannot be removed. Please have this cleaned regularly.

30

Image 30

Contents ILA Projector Table of Contents Introduction Features You’ll enjoy includeContents of the package OptionsFCC Information U.S.A. only Safety PrecautionsAbout the installation place Machine Noise Information Germany onlyDo not allow any unqualiﬁed person to install the unit Safety Precautions Power Connection This Apparatus Must be GROUNDED. ImportantMaintenance Procedures About Burning-in of D-ILA DeviceEnvironment of Use Warranty For Projectors, Video Processors and ControllersEffective Warranty Date To Open the Projector Cover Controls and FeaturesProjector Chassis Cover To Close the Projector CoverSync OUT Terminal Connector PanelService Terminal RS-232C Terminal D-sub 9 PinControls and Features Control Panel on the Projector Lamp IndicatorIndicator Display on the Control Panel About Cool Down ModeControls and Features Remote Control Installation Environment Installing the ProjectorPrecautions for Installation Precaution for UsageInstalling the Projector Projector and Screen Installation Precautions for Ceiling-mountMounting the Unit on a Ceiling Throw Distance Chart Screen Size and Projection DistanceWhen reﬂecting oﬀ a screen When directing remote control unit toward this unitConnecting to the VDP-80 digital video processor Connecting to Various DevicesConnecting to Devices Control from an external automation devicePage Adjusting Focus Turning on the powerAdjusting Zoom Basic OperationPull out the power plug from the power outlet Basic Operation Hiding the image temporarilyPress Mute Adjustments and Settings Using Menus Menu StructureAdjustments and Settings Using Menus Menu Operation Buttons FunctionPress the Menu button Procedures for Menu OperationAfter setting is completed, press Exit Press 5/6 to select a main menu item and Enter to conﬁrmAdjustments and Settings Using Menus Press 5/6 to select Projector Opt, followed by pressing Screen Blanking Project image onto the screen Press the Menu button to endShift Setting Press 5/6 to selectOptions, followed by pressing EnterWhen the lamp usage time exceeds 2010 hours Replacing the Lamp For service personnel onlyResetting Lamp Time Lamp and Lamp Usage TimeCleaning and Replacing the Filter What to do when these messages are displayed MessageActions to be taken upon warning indications About warning indicatorsPlease follow the procedures below For NosTroubleshooting SymptomTerminal Description Pin ArrangementRS-232C Terminal DVI Terminal Command Format RS-232C External ControlCommunication Speciﬁcations Parameters used for the data format External control command tableTerminal Description Numeric valueSpeciﬁcations Dimensions Page RUMA-011080 Version

Related manuals

Manual 40 pages 31.71 Kb