Chapter 4 Menu
3.Reconnect the smaller plug on the USB to
4.Connect the larger plug on the USB to
5.Press the “Menu” softkey on your WiFi phone.
6.Use the navigation key to scroll down to “Phone Settings” and press the “Select” softkey.
7.Use the navigation key to scroll down to “Firmware Upgrade” and press the “Select” softkey.
8.Your WiFi phone’s screen should display “Phone must be connected to computer. Phone will now power down.” Press the “Continue” softkey. Your WiFi phone should turn off, and it should remain turned off while you are upgrading the firmware.
9.Start the program MIPDFUTOOL.EXE from the location where you unzipped it to in Step 1.7 above.
10.Windows should display the “MIP Device Firmware Upgrade” program screen.
11.Click the “Browse” button.
12.Browse to the location where you unzipped the file
13.Select the file
14.Click the “Download” button.
15.The firmware update program will load the new firmware file onto your WiFi phone. The process may take several minutes. The WiFi phone will remain turned off while the file is loading (this is normal).
16.The program will notify you when the upgrade is complete, and it should restart your WiFi phone. Close the program, and disconnect the USB to
Step 4, Verification (optional):
1.Turn on your WiFi phone.
2.Press the “Menu” softkey.
3.Use the Navigation key to scroll down to “Information” and press the “Select” softkey.
4.Use the Navigation key to scroll down to “Firmware:”
5.The firmware revision displayed should be “51200.25.2.00c”.
18