Chapter 4 Menu
Select AP
Use the Select AP menu to connect to an existing AP.
1.When you select Select AP option, the phone lists the available networks.
2.Select the desired network.
3.Press the Connect soft key to connect.
AP Find
You can scan the local area for a WiFi access point. To scan for an AP, perform the following steps:
1.When you select the AP Find option, the phone starts searching for access points and the display shows
Searching…
2.The list of available connections is shown. Use the navigation key to scroll to the desired selection, and press the Select soft key.
3.If required, enter the necessary security information.
Note: The network icons indicate the type of security required to connect. Refer to the table below:
Icon Description
WPA passkey is required to connect.
WEP passkey is required to connect
No passkey required.
Select Profile
Use the Select Profile menu to select from existing profiles or to delete profiles that are no longer required.
1.Use the navigation key to scroll to a profile.
2.Press the Select soft key to activate the profile or press the Delete soft key to delete the profile.
© 2009, ATI Applied Technology, LLC. All rights res erved. Prepared in the United States of America. QuickPhones is a trademark of ATI Applied Technology, LLC,
in the United States and/or other countries. | 19 |