RS2056 EN 6/9/06 9:58 AM Page 22
Radio
Recording to mp3 Player
EN Selecting Tuner Band
1.Press SOURCE to enter Tuner mode.
2.Press BAND to select between FM or AM Radio band.
Tips:
Your audio system has 32 preset stations.
Tuning to a Station
Press 
or 
to select frequencies. Press and
hold 
or 
to scan frequecies.
Auto Preset Programming (FM only)
Press and hold the BAND button for 2 seconds to scan stations in FM band. The stations will then be stored as preset channels. A maximum of 32 stations can be stored. Beware of your preset channels being erased accidentally because the scanning and storing process is automatic upon pressing the button. You can stop the automatic scan by pressing any button, but the erased stations cannot be recovered.
Auto Prog
87.50MHz
You can record CD, Tuner or AUX files to the mp3 player.
Recording CD to mp3 Player
Normal/High Speed Recording
1.Connect the mp3 player to the USB port, “USB Connected” will show on the display.
2.In CD stop mode or navigation mode, press
RECORD.
3.Press 
, 
, 
or 
to select Normal or High Speed.
Rec. Speed
Normal
> High
Example (Record one CD): | EN |
In CD stop mode or CD pause mode, press
RECORD. Select Normal/High speed using 
, 
or 
, then press SELECT and DISC 1 to DISC 5 to start recording the corresponding disc.
Example (Record all 5 CDs):
In CD stop mode or CD pause mode, press RECORD. Select Normal/High speed using 
,
or 
, then press SELECT and 
to start recording (Make sure “All Disc” mode is selected).
Example (Record only selected tracks from a CD):
1. Create a CD program by following instructions |
Using Presets
The tuner can be in either TUNE or PRESET mode.
•Press 
to toggle TUNE and PRESET mode.
•Press 
or 
to access the previous or next preset station.
Preset 01
87.50MHz
Tips: Under PRESET mode, press 
or 
can only access the preset stations. Manually tuning is not accessible in this mode.
Manually Setting Presets
1.Press 
to enter TUNE mode.
2.Press 
or 
to access the desired frequency.
3.Press the PROG button once and the most recently accessed program location flashes on the display.
Preset 02
90.50MHz
4.If a different program location is preferred,
press 
or 
to move to the desired preset number
5.Press PROG to store the selected frequency at that preset.
Suppressing Stereo Signal
Press FM ST to toggle between FM mono and stereo mode. (Remote Only) “STEREO” is displayed in stereo mode.
Note:
High speed recording mode can save time when recording from CDs. It is
normal that the pitch is increased during high speed recording.
4.Press SELECT to confirm selection. The unit will enter recording standby mode. This is indicated by the RECORD icon flashes on the
display.
5. Press 
to start playback and recording will begin. This is indicated by the RECORD icon on the display.
6. Press 
to stop recording.
Tips:
To view elapsed recording time and remaining time, press BAND/INFO on
the main unit or INFO on the remote in normal speed recording mode.
|
|
|
|
|
|
|
|
Elapsed |
|
| 0:22 |
|
|
|
|
recording |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
time |
| 146:14 |
|
|
| Remaining | |
|
|
|
| ||||
|
|
|
|
|
|
| Time |
|
|
|
|
|
|
|
|
| under “Setting Up a Program List” on page | |||
| 18. |
|
|
|
2. | In CD stop mode or CD pause mode, press | |||
| RECORD. Select Normal/High speed using , | |||
| , | or | , then press SELECT. | |
3. | Press PROG and then | to enter program | ||
| playback mode. Playback and recording | |||
| begins automatically. The PROGRAM and | |||
| RECORD icons light on the display. | |||
4. | Press | to stop recording. | ||
Tips:
If CD playback is already started, recording will begin instanly when RECORD is pressed.
If CD playback is stopped, select Normal/
High Speed using 
, 
, 
or 
, then
press SELECT and 
to start recording. Recording will not start until CD starts playback.
15 |
|
|
| 16 |