MMS
Before you start to use MMS, you have to subscribe to both GPRS and MMS services provided by your operator. Then you have to adjust MMS settings in your phone to be able to use MMS.
Because MMS uses your operator's MMS server on a GPRS network to send messages to phones, you need to adjust the following settings correctly in order to use MMS:
Go to Oper.Service > WAP Service > WAP Setting to create a new WAP profile for your network settings. See page 76, "WAP Settings" for details about how to set up a WAP profile.
Go to Message > MMS > Settings > Server Info to select the MMS server for sending and receiving MMS messages.
You should contact your operator for details on MMS settings. Some operators may adjust the settings for you after you subscribe to MMS.
Editing and Sending MMS Messages
Go to MMS > New, and follow the steps below to write and send new MMS message.
1.Fill in below fields required for sending a MMS message.
•To: Press 
to enter a recipient's phone number editor. You
may enter a phone number or press 
(Browse) to select recipients from the list of contacts in the Phone Book. Follow the steps below:
a.Press 
to scroll to the name of contact, and then
press 
to select it. Repeat the step to select multiple contacts.
b.Press 
(Done) to return to the recipient's phone number editor.