System Settings 7, Heart Rate Settings 8

10	TOPCOM HB 6M00

6.7 SYSTEM SETTINGS (7 - 9)

System setting

Change the	Change the
setting	setting at a
	faster pace

To pair your chest belt and to set the hourly chime, key tone and LCD contrast.

•S2: To scroll through the different set- tings and confirm the actual setting.

•S3 or S4: Adjust the different set-

tings. [S3] or [S4]: Adjust the settings quickly.

•[S2]: To leave the personal profile settings.

When ‘PAIRING DEVICE ?’ is shown, press S3 to start the pairing. Touch the left/right contacts of the chest strep during pairing. If the pairing is done, ‘FOUND HR’ is displayed.

When hourly chime is set ‘ON’, the icon will appear in all modes. A short beep will be heard every hour,

i.e. 1:00, 2:00, etc ...

6.8 HEART RATE SETTINGS (8 - 9)

This set include the following 6 settings: In the heart rate alert zone settings you can select one from the 4 heart rate zones. Each zone has his upper and lower limit. For zone 1-3 these limits are fixed and calculated by the watch based on your age and gender. In these zones you can only set the zone alerts ON/OFF.

Zone 4 (Z4) upper and lower HR limits can be set by the user:

•S3 or S4: Select zone 4. (See also “9.10 Daily/weekly records” )

•S2: Confirm.

•S3 or S4: Adjust the user defined zone (Z4) lower level in %. [S3] or

[S4]: Adjust level quickly.

•S2: Confirm.