TIMER DELAY The TIMER can be set for a 1 to 24 hour delay TIMER
until the air conditioner turns on or off. | ON/OFF | ||
| |||
Press | or | to adjust the delay time. |
|
To set the TIMER delay to turn the air |
| ||
conditioner off, air conditioner must be in the |
| ||
ON mode. |
|
| |
Press TIMER ON/OFF. (Indicator light will |
| ||
flash.) |
|
|
|
Press | or | to change delay time (1 to 24 |
|
hours). |
|
|
|
Press TIMER ON/OFF or wait 10 seconds. (Indicator light will remain on.)
To set the TIMER delay to turn the air conditioner on, air conditioner must be in the OFF mode.
If you want to change the previous settings:
Turn air conditioner on.
Adjust MODE to AUTO, COOL, FAN, or POWER SAVER.
Adjust FAN SPEED to TURBO, HIGH or LOW. Adjust TEMPERATURE between 64°F and 86°F. Turn air conditioner off.
Press TIMER ON/OFF. (Indicator light will flash.) Press or to change delay time (1 to 24 hours). Press TIMER ON/OFF or wait 10 seconds.
If you want to keep the previous settings:
Turn air conditioner off.
Press TIMER ON/OFF. Indicator light will flash. Press or to change delay time (1 to 24 hours). Press TIMER ON/OFF or wait 10 seconds.
To clear TIMER delay program, press and hold TIMER ON/OFF for 3 seconds. Indicator light will shut off. Air conditioner can be either on or off.
To see the remaining time (in hours), press TIMER ON/OFF once after it has been programmed. While the display is showing the remaining time, you can press or to increase or decrease the time.
To operate air conditioner with remote control
POWER
ON/OFF
AutoCool
CoolTurbo
Fan Only | High |
| FAN |
| SPEED |
Power Saver | Low |
Note: Two AA batteries (not included) power the remote control. Replace batteries after six months of use, or when the remote control starts to lose power. Be sure to install batteries with correct polarity.
To select the mode, press the AutoCool, Cool, Fan Only, or Power Saver button. When air conditioner is operating in AutoCool mode, fan speed is adjusted automatically. When air conditioner is operating in Fan Only mode, fan speed is automatically set at Turbo. When air conditioner is operating in Cool or Power Saver mode, you can adjust the fan speed.
AutoCool
Cool
Fan Only
Power Saver
Turbo
Temp / Time
Timer
To turn the air conditioner on or off,
press the Power ON/OFF button.
POWER
ON/OFF
To select the fan speed (in Cool or Power Saver mode only), press the
Turbo, High or Low button.
To set Timer for a 1 to 24 hour delay until air conditioner turns on (air conditioner must be in OFF mode):
1. Press the Timer button.
2. Press the button to change delay time (1 to 24 hours).
High
FAN
SPEED
Low
Timer
To raise the temperature, press
the | button. Each time you press or hold |
the | button, the temperature will go up |
1° until it reaches 86°F.
Temp / Time
3. Press the Timer button again or wait 10 seconds.
To set Timer for a 1 to 24 hour delay until air conditioner turns off (air conditioner must be in ON mode):
To lower the temperature, press
the | button. Each time you press or hold |
the | button, the temperature will down 1° until it |
reaches 64°F.
1. Press the Timer button.
2. Press the button to change delay time (1 to 24 hours).
3. Press the Timer button again or wait 10 seconds.
6