Panasonic AG-3200P Tuner Setting, Setting clock manually Manual Clock Set

Setting clock manually

—Manual Clock Set

First follow steps 1to 2in “Preparations” above, then go to the following steps.

A Set time, date and year

Press rtuntil the desired time appears, then press OK or e. Set the date and year in the same way.

● Holding rtchanges the time in 30- minute intervals, or changes the date in 15-day intervals.

B Select D.S.T. mode

Press OK or eto move the highlight bar to “D.S.T.”, then press rtto select the desired setting.

ON: Adjustment will be made by the built-in clock itself.

OFF: Select when Daylight Saving Time does not apply to you.

CStart clock

Press MENU and normal screen appears.

To make corrections any time during the process

Press OK or erepeatedly until the item you want to change blinks, then press rt.

Manual setting of the clock will be lost after a power failure occurs.

Tuner Setting

Setting channels automatically

—Auto Channel Set

Perform Auto Channel Set only if channels have not been set correctly by the Plug&Play setting.

A Access Main Menu screen, then Tuner

Set screen

Press MENU on the Remote. Press rtto move the highlight bar (arrow) to “TUNER SET”, then press OK or e.

B Perform Auto Channel Set

Press rtto move the highlight bar (arrow) to “AUTO CHANNEL SET”, then press OK or e. The VCR selects the correct band (TV or CATV) automatically during Auto Channel Set.

● When Auto Channel Set is complete, “SCAN COMPLETED” appears on screen.

●If the scan was unsuccessful, “SCAN COMPLETED–NO SIGNAL–” appears on screen. Check the connections and start

again.

Press MENU to return to normal screen.

Setting channels manually

—Manual Channel Set

You can add the channels you want or delete the channels you do not want manually.

A Access Main Menu screen, then Tuner

Set screen

Press MENU on the Remote. Press rtto move the highlight bar (arrow) to “TUNER SET”, then press OK or e.

B Access Manual Channel Set screen

Press rtto move the highlight bar (arrow) to “MANUAL CHANNEL SET”, then press OK or e.

C Add or skip desired channels

To add channels

A Press the Number keys on the Remote to input a channel number you want to add.

B Press OK or eto set to “ADD”.

CRepeat A to B to add other channels.

Press MENU to return to normal screen.

To skip channels

APress rtor the Number keys to select a channel number you want to skip.

BPress OK or eto set to “SKIP”.

CRepeat A and B to skip other channels. Press MENU to return to normal screen.

After a power failure occurs, band selection will be reset to “CATV”.

— 8 —