EN Operating Your Air Conditioner
Operating your air conditioner properly helps you to obtain the best possible results.
This section explains proper air conditioner operation.
IMPORTANT:
•If you turn the air conditioner off, wait at least 3 minutes before turning it back on. This prevents the air conditioner from blowing a fuse or tripping a circuit breaker.
•Do not try to operate your air conditioner in the cooling mode when outside temperature is below 65°F (18°C). The inside evaporator coil will freeze up and the air conditioner will not operate properly.
Starting your air conditioner
Press Power ON/OFF to turn on air
conditioner. When air conditioner is turned on PowerON/OFF for the first time after it is plugged in, it will
display the default settings: COOL mode, TURBO fan speed, 72°F. When it is turned on all other times, it will display the previous settings.
TEMPERATURE SELECTION Press to raise the temperature.
Each time you press or hold , the temperature will go up 1° until it reaches 86°F.
Press to lower the temperature. Each time you press or hold ,
the temperature will go down 1° until it reaches 64°F.
MODE SELECTION
Press MODE until you see the indicator light come on for the setting you want. Choose AUTO, COOL, FAN or POWER SAVER.
AUTO – Cools room while it automatically controls fan speed. You cannot change fan speed, but you can adjust temperature by pressing or .
COOL – Cools room. You can select fan speed by pressing FAN SPEED. You can then adjust temperature by pressing or .
FAN ONLY – Fan runs on TURBO speed only. Only the fan runs. Display shows “FO” (fan only).
POWER SAVER – Fan runs only when cooling is needed. Fan stops running when the room temperature matches the temperature you set.
Press FAN SPEED until you see the indicator light for the setting you want. Choose TURBO, HIGH or LOW.
Select the temperature by pressing or .
FAN SPEED SELECTION | TURBO |
NOTE: FAN SPEED button will operate only | HIGH |
when COOL or POWER SAVER mode has | LOW |
been selected. | FAN |
| |
Press FAN SPEED until you see the indicator | SPEED |
| |
light for the setting you want. Choose |
|
| |
TURBO, HIGH or LOW. |
|
PowerTIMER
ON/OFFON/OFF
AUTO |
|
COOL | TURBO |
FAN | HIGH |
POWERLOW SAVER
FAN
MODESPEED
5
