RCA 40-5023 manual Watt Powered Subwoofer

Page 1

60-Watt Powered Subwoofer

Your RCA PRO-SW60P 60-Watt Powered Subwoofer is designed to give you the best possible low frequency sound quality for the ultimate home theater experience. You will be astonished by the realism it adds to movie sound effects and the power it lends to all kinds of music.

The subwoofer combines the power of a built-in 60-watt RMS amplifier with a responsive, 8-inch paper cone woofer — all housed in a tuned-port bass-reflex enclosure to produce tight, floor- rumbling, powerful bass (down to 50 Hz) that you can feel as well as hear! The POWER indicator lets you see at a glance when the subwoofer is operating.

Your subwoofer has an adjustable high cut filter and high and low level inputs, making it easy to incorporate into existing systems, or you can use it as an integral part of a subwoofer/satellite combination.

It also has these features:

Auto On/Off — automatically switches the PRO-SW60P’s amplifier to standby if the subwoofer does not receive a signal for about 11 minutes.

Standby Indicator — lights when the subwoofer is connected to power but not receiving a signal.

High Level Input — lets you connect the subwoofer to an amplifier’s or receiver’s speaker outputs.

Note: You need speaker wire (not supplied, available at your local RadioShack store) to connect the subwoofer to an amplifier or receiver’s speaker outputs.

Low Level Input — lets you connect the subwoofer to an amplifier’s or receiver’s subwoofer out or pre out jacks. These inputs automatically sum left and right channel information.

Note: You need phono cables (not supplied, available at your local RadioShack store) to connect the subwoofer to an amplifier or receiver’s subwoofer out or pre out jacks.

Volume Control — lets you match the PRO-SW60P’s output level to your satellite speakers’ output (if used).

Frequency HZ — controls the high frequency cutoff point. Rotated fully clockwise, it cuts high frequencies over 200 Hz. Rotated fully counterclockwise, it cuts high frequencies over 50 Hz.

Image 1
Contents Watt Powered Subwoofer Safety Instructions Choosing a Location Connecting to AN AmplifierAttaching Feet Connecting to Subwoofer Out or Pre Out Terminals Adjusting the Volume Connecting to PowerCare Adjusting the High CUT FrequencySpecifications Limited One-Year Warranty