Adjusting the High CUT Frequency, Care | RCA 40-5023 instruction

Once you have adjusted VOLUME CONTROL, use the amplifier/receiver’s volume control to control the speakers’ volume.

ADJUSTING THE HIGH CUT FREQUENCY

FREQUENCY HZ adjusts the level (between 50 Hz and 200 Hz) at which the subwoofer begins passing frequencies to other speakers. This control’s setting depends on the low frequency capabilities of your satellite speakers (if used), speaker placement, and other factors that affect bass performance.

While playing music, rotate FREQUENCY HZ clockwise until it sounds like the music is too bass-heavy. Then rotate it counterclockwise until the bass sounds more natural.

If the mid-bass sounds natural but you want more low bass, rotate FREQUENCY HZ counterclockwise a little, then rotate VOLUME CONTROL clockwise by about the same amount. This increases low bass output without affecting the mid-bass output.

To reduce low bass output without affecting the mid-bass output equally, rotate FREQUENCY HZ clockwise and VOLUME CONTROL counterclockwise.

CARE

To enjoy your RCA PRO-SW60P 60-Watt Powered Subwoofer for a long time:

•Keep the subwoofer dry. If it gets wet, wipe it dry immediately.

•Use and store the subwoofer only in normal temperature environments.

•Handle the subwoofer gently and carefully. Don’t drop it.

•Keep the subwoofer away from dust and dirt.

•Wipe the subwoofer with a damp cloth occasionally to keep it looking new.

Modifying or tampering with the subwoofer’s internal components can cause a malfunction and invalidate its warranty.

This subwoofer has been manufactured to the specifications of RadioShack and is covered by a limited warranty from RadioShack. If your subwoofer is not operating as it should, take it to your local RadioShack store or call 1-800-THE- SHACK for assistance.