Weslo WLTL22190 user manual Assembly, Be careful not to pull on the Wire Harness

Page 5

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrench and your own phillips screwdriver

and

adjustable wrench

.

 

Refer to the drawings below to identify the parts used in assembly.

3/4Ó Screw (55)Ð10

Handrail Bolt (15)Ð4

 

Extension Leg

Handrail Washer

 

Screw (34)Ð2

 

 

 

(16)Ð4

 

 

 

 

1. With the help of a second person, carefully raise the

1

 

26

Uprights (14), the Console Base (6), and the Right

 

 

6

Handrail (57), until the treadmill is in the position shown.

 

 

 

 

 

Be careful not to pull on the Wire Harness (26).

 

 

57

Refer to the inset drawing. Insert one of the Extension

 

 

 

Legs (41) into the treadmill as shown. (Note: It may be

 

 

14

helpful to tip the Uprights [14] in the direction shown by

 

 

 

the arrow as you insert the Extension Leg. Make sure

 

 

 

that the Base Pad [36] is on the bottom of the Extension

 

 

 

Leg.) Attach the Extension Leg with an Extension Leg

 

 

14

Screw (34). Be sure to push on the head of the

 

 

 

Extension Leg Screw while tightening it.

 

 

34

 

 

 

 

Attach the other Extension Leg (41) in the same way.

 

 

41

 

 

 

 

 

 

 

 

36

2. Cut the plastic tie holding the cage nut in the upper end

2

 

 

of Left Handrail (2).

 

 

 

 

 

 

Plastic Tie

 

 

 

15

Position the Left Handrail (2) on the left Upright (14).

 

 

 

16

 

Attach the lower end of the Left Handrail first. Thread

 

 

 

 

 

a Handrail Bolt (15) with a Handrail Washer (16) into the

 

 

2

lower end of the Left Handrail and the left Upright. Do

 

 

 

14

 

not tighten the Handrail Bolt yet.

 

 

 

 

 

Attach the upper end of the Left Handrail (2) to the left

 

 

16

 

 

 

Upright (14) with a Handrail Bolt (15) and a Handrail

 

 

15

Washer (16). Do not tighten the Handrail Bolt yet.

 

 

 

 

 

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Customer HOT Line QUESTIONS?Model No. WLTL22190 Serial No Important Precautions Table of ContentsPage Left Side Right Side Before YOU BeginBe careful not to pull on the Wire Harness AssemblyAttach the lower end of the Left Handrail first. Thread Not tighten the Handrail Bolt yetAttach the lower end of the Right Handrail first Wire Harness is not pinchedPerformant Lubetm Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Step by Step Console Operation Diagram of the ConsoleBattery Installation Turn off the power Insert the key fully into the power switchTo turn off the power, simply wait for about six Follow your progress with the monitor displayHOW to Fold the Treadmill for Storage HOW to Fold and Move the TreadmillHOW to USE the Hand Weights HOW to Lower the Treadmill for USE HOW to Move the TreadmillTop Maintenance and TROUBLE-SHOOTINGProblem The power turns off during use Problem The walking belt slips when walked on Problem The walking belt slows when walked onProblem The walking belt is off-center Conditioning Guidelines HOW to Measure Your Heart RateExercise Intensity Workout GuidelinesSuggested Stretches Qty Description Part LISTÑModel No. WLTL22190Exploded Icon Health & FITNESS, INC., 1500 S W., LOGAN, UT Ordering Replacement PartsLimited Warranty
Top Page Image Contents