Weslo WLTL22190 Wire Harness is not pinched, Attach the lower end of the Right Handrail first

Page 6

3.With the help of a second person, hold the Console Base

(6) and the Right Handrail (57) near the right Upright (14) as shown. Insert all excess Wire Harness (26) into the Handrail and down into the right Upright. Bend the Wire Harness as shown, if necessary.

Cut the plastic tie holding the cage nut in the Handrail (57).

Next, make sure that the Wire Harness (26) is inside of the bracket on the Right Handrail (57) and insert the bracket into the right Upright (14). Make sure that the

Wire Harness is not pinched.

4.Position the Right Handrail (57) on the right Upright (14).

Attach the lower end of the Right Handrail first.

Thread a Handrail Bolt (15) with a Handrail Washer (16) into the lower end of the Right Handrail and the right Upright. Do not tighten the Handrail Bolt yet.

Attach the upper end of the Right Handrail (57) to the right Upright (14) with a Handrail Bolt (15) and a Handrail Washer (16). Do not tighten the Handrail Bolt yet.

5.Attach the Console Base (6) to the Left and Right Handrails (2, 57) with four 3/4Ó Screws (55).

6.Back out the three indicated 3/4Ó Screws (55) from the Console Base (6). Align the holes in the Weight Rack (58) with the holes in the Console Base. Attach the Weight Rack with seven 3/4Ó Screws (55) as shown. Be careful not to overtighten the Screws.

Put the two 1-lb. Weights (88) into the outside slots in the Weight Rack (58), the two 2-lb. Weights (61) into the next slots, and the 3-lb. Weights (10) into the inside slots.

7.Attach the Catch (51) and the Catch Spacer (47) to the left side of the Frame (70) with two 3/4Ó Screws (55). Be careful not to overtighten the Screws.

8.Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a se- cure place. The allen wrench is used to adjust the walk- ing belt (see page 13). To protect the floor or carpet, place a mat under the treadmill.

6

3

 

 

 

 

 

6

 

 

 

Bracket

 

 

 

 

 

 

26

Plastic Tie

 

57

 

 

 

 

 

 

14

 

 

4

 

 

 

 

 

 

 

15

 

 

57

 

16

 

 

 

 

 

 

 

 

14

 

 

 

16

 

 

 

15

 

 

 

5

 

 

 

 

57

 

 

 

 

 

 

6

 

 

 

55

2

 

 

 

 

 

 

 

 

 

 

55

6

 

61

10

61

 

58

88

 

88

 

 

 

 

 

 

 

 

 

 

 

55

 

6

55

 

 

 

 

 

 

55 (Back out)

 

 

7

 

 

 

 

55

47

70

 

 

51

 

 

 

 

 

 

Image 6
Contents QUESTIONS? Model No. WLTL22190 Serial NoCustomer HOT Line Table of Contents Important PrecautionsPage Before YOU Begin Left Side Right SideAttach the lower end of the Left Handrail first. Thread AssemblyBe careful not to pull on the Wire Harness Not tighten the Handrail Bolt yetWire Harness is not pinched Attach the lower end of the Right Handrail firstOperation and Adjustment HOW to Plug in the Power CordPerformant Lubetm Walking Belt Diagram of the Console Battery InstallationStep by Step Console Operation To turn off the power, simply wait for about six Insert the key fully into the power switchTurn off the power Follow your progress with the monitor displayHOW to Fold and Move the Treadmill HOW to USE the Hand WeightsHOW to Fold the Treadmill for Storage HOW to Move the Treadmill HOW to Lower the Treadmill for USEMaintenance and TROUBLE-SHOOTING Problem The power turns off during useTop Problem The walking belt slows when walked on Problem The walking belt is off-centerProblem The walking belt slips when walked on Exercise Intensity HOW to Measure Your Heart RateConditioning Guidelines Workout GuidelinesSuggested Stretches Part LISTÑModel No. WLTL22190 Qty DescriptionExploded Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT