Assembly

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex key and your own Phillips screwdriver , two

adjustable wrenches , and wire cutters .

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of the manual. The number after the parentheses shows the quantity needed for assembly. Note: If a part is not in the parts bag, check to see if it is preat- tached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic parts, do not use power tools for assembly.

	M5 Star	M4.2 x 19mm	M5 x 16mm	M4.2 x 16mm
M6 Washer	Washer (12)–2	Screw (4)–4	Screw (5)–2	Screw (7)–6
(11)–4

M6 x 58mm Bolt (6)–4

	M8 Star	M10 Nut (16)–4
M8.5	Washer (10)–4	M10 Nut (16)–4
	Washer (10)–4

Washer (13)–4

M10 x 58mm Bolt (2)–4

	M10 Star	M6 Nut (15)–4
	M10 Star	M8 x 70mm Bolt (3)–4
	Washer (9)–2	M8 x 70mm Bolt (3)–4

M10 Washer

(14)–6

M10 x 110 Bolt (1)–2