Weslo WLTL19507.0 user manual Repeat this step on the left side of the treadmill

3. With the help of a second person, raise the Uprights	3
(53, 54) so the Base (52) is flat on the floor as shown.		Hole
Next, position the front of the treadmill Frame (51) be-
tween the Uprights.
See the inset drawing. Locate the wire inside of the
lower end of the Right Upright (54). Secure the wire to
the Wire Harness (98) using the included plastic tie.	53
Then, pull the upper end of the wire until the end of the		54
Wire Harness is extending from the indicated hole in the
upper end of the Right Upright.
Have a second person lift and hold the front end of the			23
Frame (51). Hold a Frame Spacer (23) between the Right
Upright (54) and the Frame. Attach the Right Upright and	Large	98
the Frame Spacer to the Frame with an M10 x 110mm
	Hole
Bolt (1), an M10 Washer (14), and an M10 Star Washer			14
(9).
Repeat this step on the left side of the treadmill.		52	9
			1
	51	Wire
		Tie
		98	54
4. Turn the Console (91) face-down. Be careful not to	4
scratch the face of the Console.
		5
Identify the Right Handrail (55), which has a large hole		12
in one side.		4
Attach the Right Handrail (55) to the Console (91) with		Large Hole	55
two M4.2 x 19mm Screws (4), an M5 x 16mm Screw (5),
and an M5 Star Washer (12).
		91

8