Weslo WLTL19205.2 HOW to Fold and Move the Treadmill, HOW to Fold the Treadmill for Storage

Page 12

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

1.Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the pos- sibility of injury, do not lift the frame by the plastic foot rails. Make sure to bend your legs and keep your back straight. As you raise the frame, make sure to lift with your legs rather than your back. Raise the frame about halfway to the vertical position.

2.Move your right hand to the position shown and hold the treadmill firmly. Using your left hand, pull the latch knob to the left and hold it. Raise the frame until the hole in the catch is aligned with the latch pin. Slowly release the latch knob; make sure that the latch pin is fully in- serted into the catch.

To protect the floor or carpet from damage, place a mat under the treadmill. Keep the treadmill out of di- rect sunlight. Do not leave the treadmill in the stor- age position in temperatures above 85° Fahrenheit.

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the stor- age position as described above. Make sure that the latch pin is fully inserted into the catch.

1.Hold the handrails and place one foot against a wheel.

2.Tilt the treadmill back until it rolls freely on the wheels. Carefully move the treadmill to the desired location. Never move the treadmill without tipping it back. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface.

3.Place one foot against one of the wheels, and carefully lower the treadmill until it is in the storage position.

HOW TO LOWER THE TREADMILL FOR USE

1

Frame

2

Latch

Pin

Knob

Catch

Handrail

Wheel

1.See drawing 2 above. Hold the treadmill with your right hand as shown. Pull the latch knob to the left and hold it. Pivot the frame down until it is past the latch pin.

2.See drawing 1 above. Hold the metal frame firmly with both hands, and lower it to the floor. CAUTION: To decrease the possibility of injury, do not lower the frame by gripping only the plastic foot rails. Do not drop the frame to the floor. Make sure to bend your legs and keep your back straight.

12

Image 12
Contents QUESTIONS? Model No. WLTL19205.2 Serial NoCall TOLL-FREE Mon.-Fri., 6 a.m.-6 p.m. MSTTable of Contents Important Precautions Unplug Treadmill before Assembly /Disassembly Before YOU Begin Left Side Right SideAssembly Touch the Right Handrail to discharge any static Plastic Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Diagram of the Console STEP-BY-STEP Console OperationInsert the key fully into the console HOW to Change the Incline of the Treadmill Monitor your progress with the displayHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USEMaintenance and Troubleshooting Problem The power turns off during useTop View Problem The walking belt slows when walked on HOW to Measure Your Heart Rate Conditioning GuidelinesExercise Intensity Workout GuidelinesR0606A Qty DescriptionPart Identification Chart Exploded DRAWING-Model No. WLTL19205.2 Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT