Assembly

To hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not dispose of the packing materials until assembly is completed. Do not remove the long wire is inside the Right Handrail until told to. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping car- ton. This does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrench and your own phillips screwdriver			,
adjustable wrenches	, and wire cutters	.

Note: To identify small parts used during assembly, see the PART IDENTIFICATION CHART in the center of this manual. Some parts may be preassembled. To avoid damaging plastic parts, do not use power tools for assembly.

1.Attach the six Base Pads (19) to the bottom of the Base (71) with six Base Pad Screws (42).

•Hazardous Voltage •Risk of Electric Shock

•Unplug Treadmill before Assembly /Disassembly.

1
71
42
42	42
19	42
19
	19
42

Note: The Base Pads may be preassembled.

2.Have a second person hold the Base (71) in the position shown.

Identify the Right Handrail (6), which has a large hole near

the lower end. Hold the Right Handrail so the bend is in the position shown. Attach the Right Handrail to the Base (71) with two Handrail Bolts (12), two Handrail Washers (30) and two Nuts (17). Do not tighten the

Handrail Bolts yet.

Attach the Left Handrail (7) to the Base (71) in the same way.

	19	42
		19
	2
		Bend
	7
		6
	71	12
	30	Large
	30	Hole
	17	Hole
	17
		12