Weslo 831,21611,0 manual

	To make assembly easier, read the information	1
		2
	on page 4 before you begin assembling the
		33

Turn the Front Stabilizer (2) so that the large holes are facing the Frame (1). Attach the Front Stabilizer to the Frame with two M10 x 60mm Button Screws (33).

2.Attach the Rear Stabilizer (6) to the Seat Frame (5) with two M10 x 75mm Carriage Bolts (30) and two M10 Nylon Locknuts (65).

3.Insert the end of the Seat Frame (5) into the Frame (1). Next, firmly press the Frame Bushing (56) into the Frame. Attach the Frame Bushing to the Frame with two M4 x 5mm Self-tapping Screws (66). Then, tighten the Adjustment Knob (9) into the Frame.

Carefully tip the exercise cycle onto its side. Attach the two Bumpers (57) to the Frame (1) with two M4 x 8mm Screws (29) and two M4 Washers (70). Then, tip the exercise cycle upright.

Attach the Left and Right Seat Brackets (14, 15) to the Seat Frame (5) with two M8 x 125mm Bolts (62), four M8 Washers (54), and two M8 Nylon Locknuts (10) as shown. Do not tighten the Nylon Locknuts yet.

Large

Holes 1

54 10 54 10