Weslo 310 CS user manual HOW to Adjust the Reed Switch

Page 11

HOW TO ADJUST THE REED SWITCH

If the console does not display correct feedback, the reed switch should be adjusted. In order to adjust the reed switch, the left side shield must be removed (see HOW TO ADJUST THE RESISTANCE STRAP on

page 10).

With the left side shield removed, locate the Reed Switch (43). Turn the Crank (21) until the Magnet (38)

is aligned with the Reed Sw itch. Loosen, but do not remove, the M4 x 16mm Screw (49). Slide the Reed

Switch slightly closer to or away from the Magnet. Retighten the Screw. Turn the Crank for a moment. Repeat until the console displays correct feedback. When the Reed Switch is correctly adjusted, reattach the left side shield and the left pedal.

21	43	38
	49

Image 11

Contents SEARS, Roebuck and CO Hoffman ESTATES, IL Model No Serial NoSerial Number Decal Important Precautions Table of ContentsRight Side Before YOU BeginRear Driver Pliers AssemblyPhillips screw Be careful to Battery compartmentWire Split Washers 42. Be careful to avoid pinchingMetal Bracket Frame. Be careful to avoid pinching the WiresAs shown See drawing B. Firmly pull up Firmly tighten Adjustment holes in the Seat PostTurn the Knob clockwise until it is tight Tance, turn the knob One of the adjustment holes in the seat postHOW to Adjust the Pedaling Resistance Decrease the resisCalorie Features of the ConsoleHOW to Operate the Console Time, disTance on To clean the exercise cycle, use a damp cloth and aBattery Replacement HOW to Adjust the Resistance StrapHOW to Adjust the Reed Switch Workout Guidelines HOW to Measure Your Heart RateConditioning Guidelines Exercise IntensitySuggested Stretches Exercise FrequencyQty Description Exploded DRAWING-Model NoR0702A 10 28 Exploded DRAWING-Model NoSEARS, Roebuck and CO., Dept WA, Hoffman ESTATES, IL Full 90 DAY Warranty