Weslo WLEL2006.0 user manual Assembly

ASSEMBLY

To hire an authorized service technician to assemble the elliptical exerciser, call toll-free 1-800-445-2480.

Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the

included hex keys, assembly requires a phillips screwdriver , an adjustable

wrench , and a rubber mallet .

See the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 17. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been preassembled.

M8 Split		M8 Washer	M8 Large			M10 Split		Wave Washer	Large Wave
Washer (79)–4		(64)–4	Washer (81)–2			Washer (78)–4		(27)–2	Washer (20)–4
Star Washer	M4 x 16mm		M4 x 19mm			M4 x 22mm		M8 Nylon	M10 Nylon
(85)–6	Screw (60)–4		Screw (68)–6		Screw (66)–2		Locknut (59)–6		Locknut (84)–4
M8 x 19mm Patch		M8 x 23mm Button		M8 x 25mm Patch				M8 x 45mm Button
								Bolt (11)–4
Screw (73)–4		Screw (65)–4			Screw (70)–2
M10 x 60mm Button Screw (67)–2						M10 x 76mm Button Bolt (74)–2
			M10 x 75mm Carriage Bolt (58)–2
						5