OPERATION AND ADJUSTMENT
THE PERFORMANT LUBETM WALKING BELT
Your treadmill features a walking belt coated with PERFORMANT LUBETM, a
TANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
This product must be earthed. If it should malfunction or break down, earthing provides a path of least resistance for electric cur- rent to reduce the risk of electric shock. This product is equipped with a power cord having an
See drawing 1. Plug the indicated end of the power cord into the socket on the treadmill. Lift the tab on the ferrite box and clamp the ferrite box around the power cord. Fasten the included plastic tie just behind the ferrite box and cut off the excess plastic tie. The plastic tie will prevent the ferrite box from sliding along the power cord.
See drawing 2. Press the pins on the power cord into the metal clips in the Adaptor as shown. Close the Adaptor cover over the end of the power cord and tighten the screw in the Adaptor. Important:
Make sure that the Adaptor cover is secure and the screw has been tightened before using the power cord.
See drawing 3. Plug the power cord into an appropriate outlet that is properly installed and earthed in accordance with all local codes and ordinances. Important: The treadmill is not compatible with
GFCI-equipped outlets.
1
Socket on treadmill
| Ferrite Box |
| Plastic Tie |
| Tab |
2 | Adaptor |
| |
Screw | Cover |
| Pins |
Adaptor | Metal |
| |
| Clips |
3 | Outlet |
|
DANGER: Improper connection of the
11