Newcon Optik SIB 16X40 operation manual Important Information

Page 2

IMPORTANT INFORMATION

Read prior to activation

You have just purchased a complicated electronic device. To operate it properly, please read this manual carefully. Here are some common precautions that must be noted.

NEVER hit the unit while operating or being transported

NEVER transport the unit without the case

NEVER disassemble the unit. This device contains high speed rotating parts, which may be hazardous to you!

NEVER engage the stabilizing mode while the power supply control indicator is not glowing or less than 1 minute after activating the unit

NEVER turn off the unit while stabilizing mode is engaged

NEVER reverse the polarity of a battery

ALWAYS remove batteries when not in use for a long period

ALWAYS keep the objective lenses covered when not in use

ALWAYS store in a warm dry place when not in use

2

10. QUALITY CERTIFICATE

The SIB 16x40 GR is suited for usage.

Production date _____________________________

Serial number ______________________________

Quality Inspector signature _____________________

Purchase date ______________________________

Salesman __________________________________

Quality assurance seal

Image 2
Contents SIB 16x40 GR Important Information Contents Customer SupportWarranty Brief DescriptionTrouble Shooting Appearance of the DeviceStorage and Maintenance Instructions Preparing the Device for Operation from On-board Source When finishing the observationTechnical Characteristics Preparing the Device for Operation with Image Stabilization Supplied AccessoriesOperation Instructions