10.2. Maintenance Service Types and Intervals.
10.2.1.While in use, the range finder is subject to the following types of maintenance services:
- check inspection;
- daily (routine) service; -
10.2.2.The same servicing intervals are established for the component parts and the entire range finder.
Check inspection is carried out before using the range
finder.
Daily servicing is performed after use. If the range finder is out of operation the servicing within daily scope may be abridged to biweekly visual inspection of the dehydrator condition and, if need be, replacement of the silica gel and charging of the rechargeable battery.
10.3. Check Inspection.
10.3.1.During the check inspection is ascertained the serviceable condition of the range finder as directed in Steps 1 through 7 in Table 10.1.
10.3.2.The check inspection scope is outlined in Table
10.1.
|
|
| Table 10.1 |
Operations | Procedure as | Materials, tools and | |
|
| per | accessories |
1. Cleaning | external | Para. | Lens Brush KXOOK No. 7 |
optical | surfaces | 11.6.2 | (made from synthetic fibre) |
(when so required) |
| Absorbent optical cotton | |
|
|
| Alcohol |
2.Charging of |
| Section 16 | Ether |
|
| ||
rechargeable |
|
| |
battery (when so |
|
| |
required) |
|
|
|
10.4. Daily Servicing.
10.4.1.During the daily servicing, the range finder is checked for serviceable condition in accordance with Steps 1 through 10 of Table 10.1.
10.4.2.For the daily servicing scope, see Table 10.2.