Newcon Optik LRB 20 000 operation manual Purpose, Technical Characteristics

Page 4

2.PURPOSE

2.1.Binoculars range finder LRB 20 000 AEP 36.28.001 is a device of industrial-technical purpose and designed for ground surveillance, observation of individual targets and measurement.

2.2.The range finder complete with the Angular Mount is designed for referencing ground location point by the predetermined landmark coordinates and is capable of:

- measuring horizontal angles and magnetic azimuths: - measuring vertical angles and angles of elevation;

- determination of target and landmark polar coordinates; - polar-to-rectangular landmark and target coordinate

conversion and determination of the OP and target coordinates from the predetermined landmark coordinates.

2.3.The range finder may find application in geological and engineering survey, repair works, maritime navigation, meteorology and tourism.

2.4.The range finder is operable in the temperature range between –40 and +50˚ C, relative air humidity of up to 98% (as taken at 35˚ C), air pressure of 61 kPa (460 mm Hg) minimum, and in the sea mist conditions.

2.5.Power to the range finder is supplied from rechargeable battery 10 D-0b55С-1. It may also be powered from a vehicle electrical system providing (27±2.7) V, or non-

rechargeable battery producing 12 to 14.5 or 22 to

29 V.

3. TECHNICAL CHARACTERISTICS

 

 

Rated and

 

 

Parameter

tolerable value

Actual value

 

 

 

 

1.

Binocular magnification

(7±0.3)x

 

2.

Binocular angle of vision

6.7˚±20´

 

3.

Range measurement limits, m

100 to 20,000

 

4.

Measurement error, m, max

±10

 

5.Angle measurement range, mils, min

- in azimuth

±30.00

- in elevation

± 5.00

6.

Supply voltage to generate

11±0,3

“Low Battery”light warning

 

 

circuit operation, V

 

7.

Time of preparation for range

3

measurement upon depressure

 

of MEASURE button, s, max

 

8. Range information memory

3 to 5

storage time, s

 

9.

Capacity of pumping capaci-

18 to 22

tors, µF

 

10.

Compass correction, mils

0.05

11.

Mass, kg, max

2.5

12.

Overall dimensions, mm, max

110x215x225

13.

In-service operating life,

 

 

measurements, minimum

50,000

Image 4
Contents LRB 20 Contents Following abbreviations are used herein Technical Characteristics PurposeSupplied Accessories EmitterAppearance of the Device Page Safety Precautions NeverBefore Replacing BATTERY, SET Selector to OFF Preparing for USEPage Operating Procedure Page = Am ∆ Am Serviceability Test MaintenanceSurfaces Servicing within Trouble Shooting Measure Long Term Storage Storage RulesRechargeable Battery Handling ShipmentPage Data Output to External Equipment Acceptance CertificateLong Term Storage Certificate Packing CertificateWarranty Customer SupportPage Tripod mount Angular Mount Individual Spta set