Avalon Acoustics AVALON ASCENDANT manual Installing the Grilles

Page 8

2.2Installing the Grilles

The grille assemblies are behind a panel on the outside of the speaker crate. Remove the screws securing the panel, and then carefully pull the grilles straight out. The grilles are installed with friction fasteners and press into place on the speaker cabinets. Please see Figure 2.2.

Orientation of the Felt Anti-Diffraction Mask

The grille assembly includes a felt anti-diffraction mask. Should the felt mask be removed, be sure to note the correct inside-outside orientation when re-installing it. The tweeter opening is beveled on the side that faces the listener (away from the speaker).

Fig 2.2 - To install the grille assemblies.

8

Image 8
Contents Page Page Table of Contents Page Introduction Introduction ContentsUnpacking Instructions Opening the Crate Installing the Grilles Orientation of the Felt Anti-Diffraction MaskReplacing Grille Pins Page Wiring Instructions Connecting the Speaker to the AmplifierBreak-in Period Speaker Placement and Symmetry Maximizing PerformanceBreak-in Grille AssembliesToe-in Apex CouplersFirst Reflection Points Corner TreatmentCare of Your Avalon Loudspeakers CabinetWarranty Warranty StatementPage Room Acoustics and Speaker Position IntroductionAn Optical Analogy Standing Waves Avoiding Early Reflections Flutter EchoEarly Reflections Page Bass reinforcement Page Summary of Recommendations Speaker Placement Listening Room Example Accuracy of Bass Reproduction Sensitivity to Time-Related InformationRationale Anechoic Frequency Response vs. In-Room Frequency ResponseMeasurements of Audio Equipment Correlation with Amplifier MeasurementsLoudspeaker Measurements Designing for Accurate Bass ReproductionListening for Size Distortions Listening QualitiesFrequency Response Effects Conclusion Transient Response EffectsFeatures Specifications