Stamina Products A450-255 owner manual Assembly Instructions, Step, Head SCREWM5x0.8x30mm40

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.

STEP 1

Refer to the illustrations below. Rotate the LEFT and RIGHT UPRIGHT(2, 3) to the upright position. Install the TENSION KNOB(25) into the opening in the RIGHT UPRIGHT(3) and secure with ROUND

HEAD SCREW(M5x0.8x30mm)(40).

STEP 2

Insert the BASE FRAME(4) into the LEFT and RIGHT UPRIGHT(2, 3) and secure with BUTTON HEAD BOLTS(M8x1.25x40)(37), ARC WASHERS(M8)(51), and NYLOCK NUTS(M8x1.25)(53).

STEP 3

Refer to detail view A. Lock the MAIN FRAME(1) in the unfolded position by inserting the LOCKING KNOB(33) through the hole in the SUPPORT BAR(8) and screwing it into the MAIN FRAME(1).

A.

7