Sears 831.297940 user manual Set-Up

Page 6

SET-UP

Setting up the treadmill requires two people. Set the treadmill in a cleared area and remove the packing

materials. Do not dispose of the packing materials until set-up is completed. Scissors(not included) are needed.

1.With the help of a second person, carefully raise the treadmill to the position shown at the right.

1

2.Cut the shipping tie.

Refer to HOW TO LOWER THE TREADMILL FOR USE on page 11. Follow the instructions on page 11 to lower the treadmill. Make sure there is at least one foot of clearance behind the treadmill.

2

Shipping Tie

3.Remove the backing from the Adhesive Clip (68). Press the Adhesive Clip onto the Front Endcap (29) in the indicated location. Press the Allen Wrench (69) into the Adhesive Clip.

3
	68
69	29

4.To protect the floor or carpet, place a mat under the treadmill. To order a mat, refer to the back cover of this manual.

6

Image 6

Contents Model No Serial No SEARS, Roebuck and CO., Hoffman ESTATES, ILTable of Contents Full 90 DAY WarrantyImportant Precautions Page Before YOU Begin Left Right SideSET-UP Reset the speed control Diagram of the ConsoleInsert the key fully into the power switch Step by Step Console OperationMeasure your pulse, if desired DISTANCE/LAPS displayÑThis displaySpeed displayÑThis display shows the speed Too hard, or Circulation Your thumb willOperation and Adjustment HOW to Plug in the Power CordPerformant Lubetm Walking Belt HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage Storage latch is closed fully over the upright supportHOW to Lower the Treadmill for USE Maintenance and TROUBLE-SHOOTING Problem The power turns off during use3ÓÐ4Ó Conditioning Guidelines Exercise IntensityWorkout Guidelines Part LISTÑModel No Key No. Part No. Qty. DescriptionExploded DRAWINGÑModel No 107 105 104 353 Do not Alter Model No