STORAGE
1.To store the Magnetic Recumbent 1350 Bike, simply keep it in a clean dry place.
2.Adjust the REAR FRAME(3) into the FRONT FRAME(1) to the shortest position. The Magnetic Recumbent 1350 Bike is approximately 39 3/4 inches long x 27 1/4 inches wide x 32 1/4 inches tall. These dimensions will vary. Please measure your Magnetic Recumbent 1350 Bike if exact dimensions are needed.
3.Use two people to lift the Magnetic Recumbent 1350 Bike from the FRONT STABILIZER(2) and REAR STABILIZER(4) to move.
4.To avoid damage to the electronics, remove the batteries before storing the Magnetic Recumbent 1350 Bike for one year or more.
MAINTENANCE
The safety and integrity designed into the Magnetic Recumbent 1350 Bike can only be maintained when the Magnetic Recumbent 1350 Bike is regularly examined for damage and wear. Special attention should be given to the following:
1.Adjust the TENSION KNOB(25) and verify that the Magnetic System provides tension. The Magnetic System should provide many years of use.
2.Use a wrench to verify that the pedals are tightened securely. If tightening is required, remember that the left pedal has left hand threads and is tightened by turning counterclockwise.
3.Verify that the WARNING LABEL(71) is in place and easy to read. Call Stamina Products immediately at
4.It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
5.Worn or damaged components shall be replaced immediately or the Magnetic Recumbent 1350 Bike removed from service until repair is made.
6.Only Stamina Products supplied components shall be used to maintain/repair the Magnetic Recumbent 1350 Bike.
7.Keep your Magnetic Recumbent 1350 Bike clean by wiping with an absorbent cloth after use.
14