Stamina Products 15-4525 owner manual Factory

Page 8

ASSEMBLY INSTRUCTIONS

B.	A.
	(Assembled at
	the factory)

NOTE: Be careful not to damage the PULSE SENSOR WIRES(43) when attaching the HANDRAIL(6) and the SEAT FRAME(5).

STEP 4

Refer to illustration A. Attach the HANDRAIL(6) to the SEAT FRAME(5) with CARRIAGE BOLTS (M8x1.25x45mm)(56), ARC WASHERS(M8)(73), LOCK WASHERS(M8)(75), and ACORN NUTS(M8x1.25) (72).

STEP 5

Refer to illustration B. Slide the SEAT FRAME(5) onto the REAR FRAME(3) and lock in position with the ADJUSTMENT KNOB(49). Attach the STOPPERS(50) to the top end of the REAR FRAME(3) with HEX BOLT(M8x1.25x80mm)(60) and NUT(M8x1.25)(70). Also, please verify that the other STOPPERS(50) are assembled at the factory.

8

Image 8

Contents This Product is Produced Exclusively by Stamina ProductsSafety Instructions Table of ContentsCall US First 800Before YOU Begin Fusion 4525 BikeEquipment Warning & Notice Labels Hardware Identification Chart Part No. and Description QtyAssembly Instructions StepFactory Socket Assembly Instructions SET UP Instructions Function InspectionOperational Instructions Seat Adjustment Load AdjustmentFunction Operational Instructions Using the Fitness Monitor or MeterHOW to Install and Replace Battery Maintenance StorageConditioning Guidelines Target Heart Rate Zone Estimated by AgeWARM-UP and COOL-DOWN Do not BounceLimited Warranty WarrantyProduct Parts Drawing FrontParts List Part NameParts List Page FAX/MAIL Ordering Form Stamina Products, Inc Box Springfield, MO