Stamina Products 15-4525 owner manual Assembly Instructions

Page 10

ASSEMBLY INSTRUCTIONS

STEP 8

NOTE: The RIGHT PEDAL(37) has R stamped on the end of the pedal shaft. The RIGHT PEDAL(37) has right hand threads and is tightened by turning clockwise. The LEFT PEDAL(36) has L stamped on the end of the pedal shaft. The LEFT PEDAL(36) has left hand threads and is tightened by turning counterclockwise.

Thread the RIGHT PEDAL(37) into the right side of the CRANK(7) as shown. Tighten the pedal securely. Do the same to attach the LEFT PEDAL(36) to the left side of the CRANK(7).

STEP 9

Install two AA batteries into the METER(31). Two batteries are included. See page 13 for detailed battery installation instructions. Connect the SENSOR WIRE(30) and the PULSE PLUG WIRE(38) to the EXTENSION WIRES on the METER(31). Press the METER(31) into the hole in the COVERS(33, 34).

Image 10

Contents This Product is Produced Exclusively by Stamina ProductsSafety Instructions Table of ContentsCall US First 800Before YOU Begin Fusion 4525 BikeEquipment Warning & Notice Labels Hardware Identification Chart Part No. and Description QtyAssembly Instructions StepFactory Socket Assembly Instructions SET UP Instructions Function InspectionOperational Instructions Seat Adjustment Load AdjustmentHOW to Install and Replace Battery Operational Instructions Using the Fitness Monitor or MeterFunction Maintenance StorageConditioning Guidelines Target Heart Rate Zone Estimated by AgeWARM-UP and COOL-DOWN Do not BounceLimited Warranty WarrantyProduct Parts Drawing FrontParts List Part NameParts List Page FAX/MAIL Ordering Form Stamina Products, Inc Box Springfield, MO