Stamina Products 65-2300 owner manual Assembly Instructions, Step

ASSEMBLY INSTRUCTIONS

Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all packing materials from your area and place them back into the box. Do not dispose of the packing materials until assembly is completed. Read each step carefully before beginning. If you are missing a part, please go to staminaproducts.com under the Service section and order the part needed, e-mail us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.

STEP 1

Refer to the illustration below. Place the MAIN FRAME ASSEMBLY(1) up-side down on the ground. Position the REAR SUPPORT(3) with the flange plates facing out, then attach it to the rear side of the MAIN FRAME(1) with BUTTON HEAD BOLTS(M10x1.5x25mm)(7) and WASHERS(M10)(8).

STEP 2

Attach the EXTENSION FRAME(4) to the MAIN FRAME(1) with BUTTON HEAD BOLTS (M10x1.5x25mm)(7) and WASHERS(M10)(8). Place the MAIN FRAME ASSEMBLY(1) to its upright

position.

FRONT

7	8	7
		8	3
		7
	4	8
			Flange Plates
		7	face out.
			8
			8
			7

1

REAR

7